Welding / Cutting MachinesPlasma Cutting Machines
Plasma Cutting Machines
YP-080PF3 Cutting conditions : Low-carbon steel plate thickness 19mm, Current 80A, Speed 30cm/min
- YP-060PF3 Digital Control
- Number of Phases : 1Ø/3Ø
- Input Voltage : 200V~220V 50/60Hz
- Input Power(1Ø/3Ø) : 8.5/10.9kVA
- Rated Duty Cycle 60%
- Rated Output Current : 60A
- Max Cutting capacity 36mm
- Dimensions : W220×D490×H355mm
- Weight : 22.5 kgs
- YP-080PF3 Digital Control
- Number of Phases : 1Ø/3Ø
- Input Voltage : 200V~220V 50/60Hz
- Input Power(1Ø/3Ø) : 10.7/14.6kVA
- Rated Duty Cycle 100%
- Rated Output Current : 80A
- Max Cutting capacity 40mm
- Dimensions : W290×D490×H559mm
- Weight : 37 kgs
- YP-060PA2
- Number of Phases : 1Ø/3Ø
- Input Voltage : 200V~220V 50/60Hz
- Input Power(1Ø/3Ø) : 10/14kVA
- Rated Duty Cycle 40%
- Rated Output Current : 60A
- Max Cutting capacity 35mm
- Dimensions : W210×D515×H460mm
- Weight : 32 kgs
- YP-130PF1 Inverter Water cooling
- Number of Phases : 3Ø
- Input Voltage : 200V~220V 50/60Hz
- Input Power(3Ø) : 32kVA
- Rated Duty Cycle 100%
- Rated Output Current : 130A
- Max Cutting capacity 70mm
- Dimensions : W376×D896×H764mm
- Weight : 117 kgs
- YP-200TRC TIG/Weld/Cutter
- Number of Phases : 1Ø/3Ø
- Input Voltage : 200V~220V 50/60Hz
- Input Power(1Ø/3Ø) : 8.1/12.1kVA
- Rated Duty Cycle 60%
* - Rated Output Current : 60A
- Max Cutting capacity 35mm
- Dimensions : W288×D579×H581mm
- Weight : 49 kgs
Digital Control Plasma Cutting Machine
Panasonic Plasma Cutting Machine Weldable material is carbon steel, stainless steel, aluminum, copper.
RED AIR-Plasma Cutting Torch 3
| Model | YT-03PD3 | YT-06PD3 | YT-08PD3 | YT-03PE3 | YT-06PE3 | YT-08PE3 |
|---|---|---|---|---|---|---|
| Torch Shape | Curved Shape | Pen-Pencil type | ||||
| Rated Current | 35A | 60A | 80A | 35A | 60A | 80A |
| Rated Duty Cycle | 60% | 100% | 100% | 60% | 100% | 100% |
| Cooline Type | Air Cooling | |||||
| Cable Length | 10mm (Cable length) | |||||
Inverter Plasma Cutting Machines
- TC-90X Plasma Cutting Machine
- TC-130X Plasma Cutting Machine
Inverter Plasma Cutting Machines
| Model | TC-90X | TC-130X | ||
|---|---|---|---|---|
| Input Voltage | 220V ±10% 50/60Hz | 220V ±10% 50/60Hz | ||
| Input Phase | 1Ø | 3Ø | 1Ø | 3Ø |
| Rated Input Power | 10KVA | 18KVA | 13KVA | 28.5KVA |
| Cutting Current | 10~65A | 10~90A | 20~60A | 20~130A |
| Load Voltage | 80~160V | 20~200V | ||
| Rated Duty Cycle | 100% | 40% | 100% | 40% |
| No-Load Voltage | 300V | 320V | ||
| Air Pre-flow Time | 0.5~2 sec | 0.5~2 sec | ||
| Air Post-flow Time | 2~36 sec | 2~36 sec | ||
| Current slow rise | 0.2~8 sec | 0.2~8 sec | ||
| Cutting Control | - | - | ||
| Cutting types | - | - | ||
| Pilot Arc | Yes | Yes | ||
| Dimensions (L × W × H) | 460×310×560(mm) | 630×400×750(mm) | ||
| Weight | 35(Kgs) | 80(Kgs) | ||
Multipurpose Welder/Cutter Machines
- DTC-200/50XII Multipurpose Welder/Cutter
- TIG, STICK and CUT funtion all can be used.
- 110V/220V intelligent auto-change and 380V/440V auto-warning protection.
- Using feedback circuit control for power input current of 110V is much less than 220V to prevent input current of 110V overtake safely range and make a fire accident.
- TIG and CUT auto-change, don't change any connection.
- STICK current can reach to 200A.
- Cutting thickness of white iron can reach to 18mm.
- DTC-250/60XII Multipurpose Welder/Cutter
- IG, STICK and CUT funtion all can be used.
- 110V/220V intelligent auto-change and 380V/440V auto-warning protection.
- Using feedback circuit control for power input current of 110V is much less than 220V to prevent input current of 110V overtake safely range and make a fire accident.
- TIG and CUT auto-change, don't change any connection.
- With funtion of pilot arc for cutting torch.
- With funtion of electrode short auto-warning to protect cutting torch.
- Cutting thickness of white iron can reach to 25mm.
- CUT-90 Inverter Air Plasma Current Welder
- Rated Input Voltage (AC) 220V/380V
- Rated Input Power(kVA) 15
- Rated Output Current(A) 23
- Rated Output Voltage(V) 270
- Output Current Range(A) 20~100
- Rated Duty Cycle(%) 60
- Efficiency(%) 85
- Power Factor 0.93
- Insulation Class : F
- Weight : 50 Kgs
- Dimensions : 540mm×283mm×500mm
Multipurpose Welder/Cutter Machines
| Model | DTC-200/50XII | DTC-250/60XII | |||
|---|---|---|---|---|---|
| Input Voltage | 110V | 220V | 110V | 220V | |
| Input Phase | 1Ø 50/60Hz | 1Ø 50/60Hz | |||
| Rated Input Power | 3.3KVA | 9KVA | 4.7KVA | 11.5KVA | |
| Welding Current | TIG | 4~170A | 4~200A | 4~180A | 4~250A |
| STICK | 4~130A | 4~200A | 4~150A | 4~200A | |
| Cutting Current | 10~25A | 10~50A | 10~30A | 10~60A | |
| Welding Current | TIG | 18V | 21V | 18V | 21V |
| STICK | 28V | 31V | 28V | 31V | |
| Load Voltage (CUT) | 80~140V | 80~140V | |||
| Rated Duty Cycle | 100% | 35% | 100% | 40% | |
| No-Load Voltage | WELD:65V CUT:270V | WELD:65V CUT:280V | |||
| Initial Current | 4~200A | 4~250A | |||
| Welding Current | 4~200A | 4~250A | |||
| Crater Current | 4~200A | 4~250A | |||
| Cutting Current | 10~50A | 10~60A | |||
| Ar Pre-flow Time | 0.1~2 sec | 0.1~2 sec | |||
| Ar Post-flow Time | 2~20 sec | 2~20 sec | |||
| Air Pre-flow Time | 0.5~2 sec | 0.5~2 sec | |||
| Air Post-flow Time | 5~25 sec | 5~25 sec | |||
| Creater Control | Off/On/Repeat | Off/On/Repeat | |||
| Cutting Control | - | - | |||
| Pilot Arc | No | Yes | |||
| Dimensions (L × W × H) | 380×195×300(mm) | 410×245×400(mm) | |||
| Weight | 13(Kg) | 23(Kg) | |||